It’s been an amazing Pallets Aplenty week — and today is the last day! We’re finishing strong though with an amazingly talented guest and her amazing pallet wood light box that you’re going to go rustic-crazy for! (And, bonus, it matches her pallet kitchen island, check it out below.) Welcome the very talented Jen to Remodelaholic and try not to drool too much over her beautifully redone kitchen 
Follow along over on Facebook and Instagram with #palletsaplenty to see all sorts of pallet-y goodness, and be sure to subscribe by email or RSS to get more project tutorials and inspiration!
How to Make a Pallet Wood Light Box
by Jen from Noting Grace
Hi, fellow DIYers! My name is Jen from
Noting Grace, and I’m over the moon excited to be here today. I blog all about finding budget-minded ways to dress your nest for less. A few years ago, we purchased our dated ‘Almost Farmhouse’ here in Tennessee that we have slowly been loving back to life. The kitchen was the biggest eyesore and also a doozy to remodel! You can check out our entire before and after
Farmhouse Kitchen Makeover and how we saved tons of money by doing most of the work ourselves over at my blog.
I have a thing for pallet wood – first off, because I’m thrifty and secondly, because it’s free! Plus, it has so much beautiful, weathered character that is hard to replicate. When our kitchen island light wasn’t working for our space, we needed a simple and affordable option, so we built a Pallet Light Box for less than $50. I am thrilled to be sharing all of the step-by-step details with you! If you have an awkward space that needs lighting, or an off centered fixture, this is definitely the post for you.
When we renovated our kitchen, I was given a gorgeous,
emerald green enamel light shade that I loved, and still do, but it just wasn’t working with where I had placed it.
Our kitchen is dark. I mean gloomy-on-a-shady-day kinda dark. Over time, we realized that the pendant light wasn’t bright enough and the enamel blocked the light from bouncing off the ceiling which would brighten the room.
When we started to replace our kitchen floor and upgrade our
Pallet Kitchen Island, we were left with lots of scraps. So what to do with that left over pallet wood? That’s right! Build a light box! By reusing materials and never letting anything go to waste, it can save you lots of money.
Materials
The dimensions of our box are 32 L x 17 W x 3 D
- Pallet wood pieces
- Allen Roth lighting fixture
- Deck screws
- Anchor screws
- Carpenters Square
- Power Drill
- Circular Saw
- Stud Finder
- 1 1 x 1 pine baluster
When we found this light fixture from Allen Roth at Lowe’s, I immediately fell in love with it because I can change the glass shades to mason jars if I want. The glass pendants were perfect to allow the light to fully shine through, but I didn’t want them clustered together. The challenge was separating the clustered lights to be spread across the length of the kitchen island.
Here’s how we did it:
The first step is to build the box. Most pallets are constructed with a 2 x 4 frame and slats of varying sizes. We like to use wood from the same pallet for uniformity, but there are no hard and fast rules with this – be creative! The dimensions of our box are 32 L x 17 W x 3 D.
I loved the slats with the imprinted numbers, and wanted to show them off, so they became the end pieces. A carpenter’s square is handy to ensure that the box is even.
Since it is pallet wood, your pieces do not need to be perfect or straight. Trim the wood to your specifications using a circular saw and don’t worry about perfection.
By adding the slats of wood to our box top, we basically built a mini-pallet.
What I love about pallet wood is the weathered, aged aspect.
We used the old nail holes to screw the box together and it just adds to the charm!
Now it’s time to affix the box to the ceiling. We cut the 1 x 1 baluster in half and used them as braces. This is what you will screw the box to so make sure your box fits snug around the braces. Use a stud finder to find the joists in the ceiling and screw them in. In our case, there wasn’t a joist on one side, so we had to use heavy duty anchor screws.
Next, we needed to wire the box and separate the cluster of lights. Another thing I loved about this light fixture is that it allows you to choose your lengths and is easy to disassemble into 3 separate cords.
We drilled holes big enough for each cord to feed through the light box.
We just knotted the cord to the length that we wanted to hang the pendant lights.
The awesome thing about the light box is that we were able to keep the length of the light cords in case we ever wanted to rehang this fixture someplace else. All that extra cord is stowed away in the box.
Then we attached the cords to the base plate of the fixture. Since I’m not an electrician and I don’t play one on TV, I’m not going to give instructions on this step. This is an important and potentially dangerous step, so have someone who knows what they are doing to help with the electrical, or be sure to educate yourself.
Finally, we fit the box around the braces, holding it tight to the ceiling, and screwed the sides of the light box into the braces.
That’s it!
Easy peasy, done in one afternoon and swoon-worthy!
I love the random stamped sides, adding that true pallet character to the box.
For now, I’m keeping the clear shades, until I find vintage, wide mouthed mason jars.
I love that I was able to create an easy, budget friendly light fixture that solved so many issues. No more dark, dreary kitchen, lots of light over our revamped kitchen island, and a unique piece that is a definite conversation starter when company comes!
Do you have any pallet wood lying around and have been searching for inspiration? I’d love to hear if this inspires you to create your own light box! Be sure to keep up with me on social media and show me your creation!
Jen, thank you so much for sharing your beautiful work — I love your kitchen!
Remodelaholics, go pay Jen a visit at Noting Grace and don’t miss her Almost Farmhouse Home Tour!
More beautiful DIY lighting tutorials:
vanity light strip turned mason jar light
DIY wood bead chandelier
upcycled rope chandelier
The post How to Make a Pallet Wood Light Box appeared first on Remodelaholic.
from Home Improvement 1 http://ift.tt/2dz71bD
No comments:
Post a Comment