Kitchens are always a favorite space of mine — so many ways to add character and reflect your style in the heart of your home. Our guest today had already made some great updates to her kitchen, but the affordable DIY marble countertops she added (right over the top of her existing laminate counters) and the subway tile backsplash (over the old backsplash) really made the whole kitchen shine:
And her DIY faux copper light doesn’t look too shabby either
Annie is sharing all the details below, and see a few more of our favorite kitchen makeovers — both white and other
by Remodelaholic… hey, that’s us!
Give Annie a warm Remodelaholic welcome!
White Kitchen Mini-Makeover with
Tiled DIY Marble Countertops + Copper Light Fixture
by Annie of zevy joy
Hello my name is Annie and I am from the blog, zevy joy. I enjoy sharing my stories as a stay-at-home mom. I write and photograph about my experiences designing, crafting, dressing and even cooking on a limited budget. The name zevy joy is a portmanteau of my children’s names as they fill my life with joy. You can find some of my favorite projects here, here and here. I love encouraging others to make it work using what they have or finding ways to do it creatively. I hope you leave feeling inspired in this very manner.
Hello and welcome to our home at zevy joy. Over the years we have slowly been putting abundent love and work into each room here. The latest to recieve the most attention was our kitchen. This kitchen has seen two different remodeling stages. The first being when we moved in. With the help of family and friends, we tore down a small wall, painted cabinets, added cabinet trim, installed new cabinets, put in a travertine backsplash, replaced the laminate floors with hardwood and made an island. It is exhausting just to think about!
BEFORE
We ended up with this lovely space pictured above for the last 8 years. We loved this kitchen, despite how teeny tiny it was it worked well for our family. We made small changes in between renovations one and two, such as new appliances and spray painted fixtures. Since day one of moving in we knew we wanted to replace the countertops, but it slowly became one of those projects that was put on the back burner. Too much time, too much money, etc… etc….
Which brings us to the end of this past summer. Since we had been working on the rest of our home, many of the earthy colored walls had changed to linen white and our style had evolved. Our sweet warm kitchen was ready for a change, but aware of our tight budget and nearly one income family, we had to find a way to do it affordably. We researched many options such as concrete, laminate, paint, tile and more.
We based our decision off of the criteria that we wanted something light, bright, and classic in design since we wanted to live with it for a long time. After lots of pricing and research, large tiles were our best choice for the following reasons:
- Large tiles would resemble slab for a fraction of the price.
- We could install it ourselves with tools we had access to.
- We could do it on top of our existing laminate countertops (there was a concern about removing the countertops ourselves and damaging our perfectly good cabinets).
Here is what you will need to install large tiles on top of laminate countertops…
- Large 12×24 honed carrera marble tiles (or any tile of your choice). The amount will depend on the length and size of your kitchen. We bought twice as much tile as needed so that we could make colors and patterns most pleasing when laid out. Check with your supplier to verify that you can return what pieces you will not be using. We purchased our Honed Carrera 12 inch x 24 inch tile from Tile For Less.
- Mortar designed for large tile. Make sure that it is white because of the pourous nature of marble and color could potentially show through. We used this.
- Mixing paddle for drill
- Wet tile saw
- Tile Sanding Stone (for filing down cut edges)
- Notched Trowel
- Non-Sanded Grout (splurge and buy the more expensive stuff from a reputable tile store rather than the cheap generic brand from major home improvement stores — we used this)
- Rubber float
- Buckets
- Clean Water
- Towels
- Sponge
- Cheese Cloth
- Tile Sealer
- Safety gear (eye protection, masks, gloves, etc.)
To apply large tiles over previous existing laminate counter tops you will…
Measure and cut each tile. Lay out your pattern and spacing ahead of time to make sure it will fit and you are happy with the pattern. As a result of our countertop’s size, we needed to get creative with the layout and ran slender pieces along the edges. The seam is visible from the top, instead of the front. You will need to file your edge pieces around each side using the sanding stone before they are applied.
Follow instructions from the manufacturer and mix your mortar. Using your trowel apply the mortar and begin laying your tile. Spacers were not needed for these tiles because they had angled edges that allowed for 1/16 inch spacing. At the end of tile application we used painters tape to hold the edge pieces in place as they firmed and dried. Important: make sure you work fast enough to use mortar that is properly hydrated and not dried out – particularly on the edges! Dry mortar will result in a weak bond and the tiles may easily dislodge.
Make sure to follow specified wait times (typically 24-48 hours) before grouting. Apply one to two coats of sealer so that it will protect the tiles during the grout process (again, allowing for proper wait time). Alternatively, sealer may be applied to the tile before setting them in the first place.
Once dry, mix and apply grout with a rubber float. As a side note, try your best to match up your grout to your tiles. We went with a smoke gray (different choices we considered are pictured above).
Allow the grout to dry and then seal your final project.
For an island….
This island of ours is a whole different story. We have made some mistakes with application along the way and also had some structural issues. This was NOT the case with our countertops which have held up wonderfully. We originally tried to apply the same process listed above on top of our butcher block island. This was a mistake because the wood absorbed the moisture and cupped. It cracked our grout and needed to be reapplied. We carefully removed each tile, re-prepped and started the process all over again.
The second time around we used plywood for the base, cement board as the surface and then repeated the tiling process. This worked out perfectly until about a week after application. We noticed a very fine hairline crack at the edge of our island. We are confident that this is another issue we can troubleshoot. We believe that even after putting supports under the island we needed stronger ones. The weight of our long overhang (which you can see in the pictures) seems to have caused a slight bow which was enough to create a hairline crack across the opposite end. Moving forward, we have purchased heavy duty supports and will take the three damaged tiles off , with hopes that replacing them will yield a permanent solution. Which brings me to my next point and some very important things to remember: supports and weight. If considering this project, please make sure to check that your surfaces are level and weight bearing. These marble tiles are very heavy and they will add significant weight to whatever surface you are applying them.
Subway Tile Backsplash over Existing Tile Backsplash
Here is what used for our tile backsplash (which was put right on top of our old tile backsplash)
- 3 x 5 Porcelain Subway Tiles in Bright White
- Thinset
- Tile-cutter
- Notched Trowel
- Non-Sanded Grout
- Paddle Mixer for your electric drill
- Rubber float
- High grit sandpaper (may be needed to rough up existing tile)
- Buckets
- Clean Water
- Towels
- Sponge
- Cheese Cloth
- Safety gear (protective eye gear, masks, gloves, etc.)
To apply the tile backsplash over the existing tile, you will need to…
- Administer a very rough sanding to the existing travertine tile to ensure it would adhere.
- Mix thinset according to manufacture’s instructions and begin adhering each tile from the bottom up in a running bond pattern. These specific tiles we were self spacing at 1/16 of an inch which made spacers unnecessary.
- Wait the adequete amount of time required for thinset to set (should be specified on the box instructions).
- Now mix your non-sanded grout using the paddle.
- Use your float to apply the grout and again, carefully follow the instructions to insure appropriate application and dry times.
Here is the basic run down for project costs and time…
- The backsplash including tiles, thinset and grout cost around $100. When you buy individual tiles it is less expensive than those that are sold as sheets.
- The marble tiles, mortar, grout and sealer cost around $500.
- Tools and miscellaneous materials did not factor into our cost because we were fortunate to have access to my Father-in-Law’s tools (who also so generously gave his time to help with this project).
- Due to some mistakes, this project did necessitate some extra cost and time (which should be factored into every DIY).
- We spread this renovation over a period of nearly five weekends (including fixes due to unforeseen issues). If this were done without the issues we encountered, I would assume that the job could be done in approximately seven – ten days (with drying times of 24 – 48 hours for each application of mortar, thinset trout and sealer).
DIY Faux Copper Light Fixture
We also spray painted the builder grade light fixture above our island.
Here is what you will need and the simple directions to do this yourself…
- Two varieties of copper spray paint. I used a matte and a glossy version. One can of white glossy spray paint. One can of Oil Rubbed Bronze Spray paint for the base of the fixture. Fine grit sandpaper, safety gear (protective eyewear, masks, gloves, etc.)
- Put out carboard to protect the surface you are spraying outside. Start by spraying the inside of your fixtures with the bright white and allow to dry. Spray a second coat.
- Once totally dry, turn your fixtures over and spray paint the tops with the glossy copper. Do a couple coats.
- Next, spray with the matted copper and before it completely dries carefully sand it in vertical motions to create texture and aging. Do another coat and repeat sanding.
- Lastly, hang and spray paint the base of your fixture using oil rubbed bronze. Another couple coats will be necessary.
If asked if I would recommend this project to someone else, the answer is yes! We love our new kitchen and how it flows with the rest of our home. There were some unforseen challenges and it was exhausting at times throughout the process, but we learned a lot. There is such a satisfication when completing projects in our home. Without DIY we would not be able to have some of these upgrades and we are so grateful for the opportunity.
I appreciate you stopping by to read more about our process and I certainly hope this helps if you are trying to find a way to make upgrades within limitations. I encourage you to get creative and embrace the unique design that doing it yourself can bring to your home. A big “thank you” goes out to my dad and father-in-law for their design advice and physcial assistance during this huge project!
Sources and Paint Colors
Wall Paint Color – Linen by Clark and Kensington at Ace Hardware
Cabinet Color – Navajo White
Marble – Honed Carerra Marble
Copper Tray – Painted Fox Treasures
Dish Towels – Home Goods
Sink – Ikea Domsjo
Faucet – Ikea – no longer available
Annie, your kitchen and your home are beautiful! Thank you so much for visiting us today to share!
Remodelaholics — be sure to visit and follow Annie over at Zevy Joy to see more of her beautiful home, including this smart guest bed lounge sofa solution:
and if it’s possible… the kitchen is even prettier decorated for Christmas! See Annie’s holiday home tour here.
The post Kitchen Mini-Makeover with Affordable Tiled DIY Marble Countertops and Aged Copper Light Fixture appeared first on Remodelaholic.
from Home Improvement 1 http://ift.tt/1O9oe51
No comments:
Post a Comment