DIY Wall Mounted Pot Rack from a Shallow Display Cabinet

Every homes has its quirks and unique features — which for some owners are a considered perks, while leaving other owners scratching their heads and wondering what to do with the space. This is especially obvious most often in kitchens, where dated features that were once amazing are now cramped or unused — but not for long when a creative DIYer moves in! Liz is our guest today, and she’s here to share how her son and daughter in law transformed a shallow display cabinet that they weren’t using into a very useful wall mounted pot rack:

Read below for the details of the transformation, and be sure to check out these other posts (by clicking on the photos) for more creative kitchen storage ideas from DIYers who made the space work for them, plus see more clever kitchen ideas here: 

how to build a storage range hood

build a custom kitchen plate rack

DIY upright utensil drawer organizer

build a storage cabinet over the fridge

Inspired to make your kitchen space work for what you need? Here’s Liz with all the details of this smart wall mounted pot rack:

DIY Wall Mounted Pot Rack from a Shallow Display Cabinet
by Liz from Simple Decorating Tips

Working with both a minimal budget and space, my son and daughter in law created this DIY wall mounted pot rack with beadboard.

Hi, I’m Liz from SimpleDecoratingTips.com! I’m super excited to share this DIY wall mounted potrack with you for a couple of reasons… First, because I’m thrilled to be a guest over here at Remodelaholic… and Secondly, because it was my son and daughter in law that built this pot rack, so I get to brag a little!

I am an interior designer, (turned blog author) so I did offer a little advice on the basic design thought, but let me tell ya… they took a little thought of mine and went places with it!

Here’s what the wall in their early 1900’s house looked like before they did anything:

It’s a little hard to make out in the picture, but behind the glass doors are super shallow glass shelves.

In fact, they were about 4″ deep…

Perfect if you have a salt and pepper shaker collection, or some really small item you want to display.

My son and his wife, however, didn’t want to waste precious space in this small kitchen if they could help it. So they removed the doors, the glass shelves and the hardware holding the shelves.

Then they filled the screw holes in the cabinet parts that were left on the wall with wall filler.

Once that was dry, they primed the entire frame of the cabinet sides that would be exposed, (not the back because they had a beadboard plan for that) and once the primer was dry… they painted the frame white.

They measured the opening of the backs and went to the hardware store to get some super thin beadboard.

This beadboard they used, came prepackaged and pre-primed. It is a tongue and groove type of product, made of a thin pressed board material that was about 6″ wide per strip. That made the project a little easier considering they didn’t have much for wood working tools, and the pressed board cut easily with a jigsaw and razor knife… and simple sandpaper smoothed the rough edges nicely.

Then they glued the backs of the beadboard strips to the inside back of the existing cabinets, piece by piece, using construction adhesive in a caulk tube and gun.

Once the beadboard was all installed, they painted it this light gray color.

Then it was time for hardware:

Again, from Home Depot, the simple hooks were perfect for the holes in the pot handles to fit in.

Then for the pot lids, they came up with this ingenious plan…

A trip through the plumbing department:

Using simple copper pipes, fittings and plumbing brackets, they created a slot to slide the lids down in and rest against.

To get the copper to be a nice dark finish, I had some old tarnishing solvent in my paint stash from about 20 years ago… after a few wipes of that, ta-da! dark brown!

All their pans fit wonderfully on the wall mounted pot rack with a beautiful beadboard back to accent the room with.

My son and daughter in law did this project about 5 years ago, and it was less than $100 to do the whole project. They have just sold that house and are now moving into a mid 70’s house that they will be renovating with an open style feel… (walls are coming down!)

It’d be fun to have you to stop by my site and check out some other pot racks I’ve designed and installed, (one has brick involved!) The Potrack in Our 100 Year Old House, and The Potrack in our Former House.

And I’d be thrilled to have you follow along with me on my decorating blog, SimpleDecoratingTips.com as I share my experiences renovating our 100 year old house, decorate a coastal cottage in Maine, and work on a few other projects, like my son and daughter in law’s new 1970’s house project! I even have a little travel thrown in here and there.

---

Thanks for sharing, Liz! Such a smart idea!

Remodelaholics, be sure to visit SimpleDecoratingTips.com to see more from Liz — you won’t want to miss her farmhouse style kitchen before and after!

Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Please see our full disclosure here.

The post DIY Wall Mounted Pot Rack from a Shallow Display Cabinet appeared first on Remodelaholic.

from Home Improvement 1 http://ift.tt/2b3OeUZ