Hello! I'm Sara from Sincerely, Sara D., and I'm thrilled to be here with you today on Remodelaholic.
I wanted to give my family room an entirely new look, and this DIY paneled wall treatment makes such an elegant statement.
I do not claim to be a woodworker, but I am pleased with the result and spent around $300.
How to Install a DIY Paneled Wall Treatment
Watch the video and subscribe here on our YouTube channel, and read below for the written instructions.
Materials
This post contains affiliate links for your convenience; learn more here.
Here's what I used:
- (2) 4.5″ corner blocks like these
- (20) 1 3/8″ x 8 ft primed base cap molding
- (15) 4.4″ x 8 ft primed corner blocked square edge
- (8) tubes of caulk (but I'd recommend using a caulking gun) plus some wood filler
- (1) gallon of Valspar Reserve Paint in Nightime View
You'll also need a basic miter saw and a pneumatic nail gun and compressor.
This is what the primed base cap looks like.
And this is the primed corner block square edge.
Step-by-Step Installation Instructions
I began on the top of the wall and worked my wall down. I cut a piece of the corner block square edge to size and made sure the top piece was level while attempting to have it as close to the ceiling as possible.
This is where things get tricky pretty fast. I cut pieces of the corner caps and created a frame around the corner blocks. I then cut pieces of the corner block square edge to fit around the framed corner blocks. I had bigger gaps than I would have liked, but I used caulk to fill those in (again, I am new to solo woodworking)!
Once that top part is done, the rest is easy! I added a piece of the corner block square edge to the bottom of the wall above the existing trim.
I then cut more corner block square edge to frame in the lower portion of the wall.
And then framed in the rest of the lower portion with the block square edge. Then I framed inside that with the trim cap.
After all the trim was hung, I went through and caulked everything. This took forever, and I would suggest using a caulk gun over the individual tubes like I did.
Read more: Caulking 101 | How to Caulk + Tips for a Pro Job
Once the caulk dried, I painted the entire paneled wall with two coats of paint.
I added a couple hanging lamps to both paneled walls, and I was done!
Wall treatments can make a high impact in a space for low cost. Want more DIY wall treatment ideas? Check out my square paneled wall tutorial and my shiplap tutorial!
Find me on Facebook | Instagram | Twitter | Pinterest
More high-impact but budget-friendly wall treatments:
board and batten (plus read our tutorial for perfect spacing)
farmhouse style X barn door wainscoting
plus more wainscoting styles and tips
The post DIY Elegant Paneled Wall Treatment appeared first on Remodelaholic.
from Home Improvement 1 http://ift.tt/2sBg26m
No comments:
Post a Comment